AB Turbi Airbrush–
The AB is designed for the
experienced fine
artist where the project demands only the absolute finest control for fine area
spraying. The airbrush can achieve spray patterns from the finest hairline to a
gradually widening pattern of ¾". Available in right or left handed
versions. Distinctive wooden box.
H#1Airbrush –
A siphon feed single action external mix airbrush that is
dependable and adaptable for practically any hobby use. Used for painting whole
doll body parts. Available in right or left handed versions.
D200R Air Compressor –
A durable, "studio quiet" oil-less
diaphragm air compressor designed to use with any airbrush and delivers up to
approximately 40 lbs. of pressure.
6’ Air Hose
And By Dr. Ph. Martin's
Spectralite Water Based Acrylic Paints
These paints are made from the finest artist’s pigments and are
non-clogging with the right viscosity necessary to achieve quality airbrush
effects. The colors are intermixable, adhere easily, and are non-toxic with
water clean up. Each color is premixed and bottled in a special dropper-capped
container. Selected paint set includes 11 colors.
Airbrush Cleaner –
non-odorous, non-evaporating and safe for use in
your airbrush.
Color Extender –
enables you to alter the intensity of colors by simply
adding drops to the paint. Allows for transparency to feather colors with the
airbrush.
Iron Oxide-granules mixed with water that
gives the acrylic paint that "old" look.
Manufacturer's Suggested Retail Cost:
Paasche ABL Airbrush with case
$335.00
Paasche H#1 Airbrush
$ 57.00
Paasche D200R Compressor
$189.50
Extra Needles for AB Airbrush
$ 24.00
Extra Needles for ABL Airbrush
$ 24.00
(Includes 11 colors, airbrush cleaner,
extender & iron oxide)
Equipment Package includes Paasache AB
or ABL airbrush, H#1 Airbrush, D200R Compressor
Air hose, Extra Needles, and Paint Set
Other Paasche Items
Order Individual Paint Colors
Specify color by note on cart (Suntan, Flesh1, Flesh2,
Apoxie Sculpt is
a self hardening synthetic clay that is non-toxic, waterproof with 0%
shrinkage. It adheres to most clean surfaces including bisque, composition,
metal, wood and plastics. It comes in two parts that are mixed equally and
thoroughly similar to Sculp-Epox. Product can be seamlessly feathered
before set up, then sanded and painted. Working time is about 3 hours with hard
cure overnight or 24 hours. Simple water clean-up. Uses: sculpting fingers,
toes, shoulder plates, etc. Apoxie Sculpt comes in ¼ pound. one pound and
three pound sizes. I recommend purchasing the smaller amount as it does
have a dated shelf life. It can be stored in a refrigerator or freezer to
prolong its shelf life. White in color for dolls.
Apoxie Pasteis the same self
hardening clay as Apoxie Sculpt
but in a stir able version. Uses: hairline cracks, eye chips, eye cracks on
composition dolls, etc. The paste can be heated in the microwave at 15 second
segments to liquefy to product. Then the liquid paste can be mixed and either
brushed on or applied with a spatula. It is great for filling small cracks in
composition dolls. Be very careful of handling the hot liquid paste and always
use a pot holder. The paste is also mixed in equal parts.
Apoxie Paste, 2 ounce $7.50
Fixit
Paste
is a bonding, filling and mending adhesive agent. It works on composition,
wood, bisque, metal, china, and plastics. The self hardening paste is mixed in
two-part equal measurements and can be sanded and painted when set. It works
great on attaching broken parts on plastic such as flanges or hands.
Safety Solvent
is used to clean up your project, tools A little
on your fingers help smooth out the clays. There is no strong odor as
acetone and is gentler to your hands. It is approved by all shipping
methods.